Warfighter - Hueforge

This is 5 colour Hueforge of Warfighter. I uploaded two sizes 150x200 X1/P1/A1 and size 135x180 for A1 Mini.And profiles for both sizes with pause during 2nd colour (Dark Gray) for changing the other spool.Guide for printing more than 4 colours with single AMS down below instructions.Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. If you want stand for this print check out my Simple vertical stand. Boost MeI print all of my creations myself.If you like my work, pls send me a boost, it will help me make more.Feel free to PM me if you have some idea for a nice picture.Thank you. Instructions:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Dark Gray Transmission Distance: 2.4 PLA BambuLab Basic Magenta Transmission Distance: 4 PLA Bamb