Thingiverse

Washi Tape Holder

by radsa

7 Downloads

22 Likes

0 Makes

A sturdy washi tape holder with a rim for the extended tape.
It's dimensions are 46.5w x 145l x 45h mm. The diameter of the cylinder is 25 mm and it's length is 125 mm.

Printer:
Creality Ender 3
Rafts:
No
Supports:
Tree
Resolution:
0.2 mm layer height, 4 top/bottom surfaces and 2 perimeters
Infill: 20%

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Layer height

0.2 mm

Est. print time

45 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Washi Tape Holder need supports when printing?

No supports needed for Washi Tape Holder — it's designed to print clean off the bed.

How long does it take to print Washi Tape Holder?

According to the design notes, Washi Tape Holder takes approximately 45 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Washi Tape Holder available in?

Washi Tape Holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Washi Tape Holder free to download?

Yes, Washi Tape Holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Washi Tape Holder

Add to Collection