Water Valve 8mm

For 8mm tubes.
Need two 8x2mm o-rings or one 8x2mm and one at most 12x3mm.

The upper nut with an o-ring inside should prevent leakage from the rod that opens and closes the valve.

Made to be used with this bucket-8mm tube connector: https://www.thingiverse.com/thing:6130195

Recommend printing nut at ~105% and main rod at ~95% or so for a reasonable fit.
Recommend printing them lying down for strength even if it looks worse and requires some after work.



Suggestions for parts used:

https://www.bauhaus.se/pvc-slang-gron-8x1mm

https://www.amazon.se/t%C3%A4tningsringar-sortiment-gummiringar-t%C3%A4tningssats-t%C3%A4tningsskivor/dp/B0B5K2CFDG/ref=d_pd_sbs_sccl_3_2/258-1505709-1131218?pd_rd_w=kYh8q&content-id=amzn1.sym.c4184aba-d168-41de-ae27-7ea9a5ac5302&pf_rd_p=c4184aba-d168-41de-ae27-7ea9a5ac5302&pf_rd_r=F2ZRX6HN6ZHBBDR3EFWQ&pd_rd_wg=kZ66z&pd_rd_r=db048595-995f-4272-a6d2-dcb958c7b5c5&pd_rd_i=B0B5K2CFDG&psc=1