Waves

Wave shelfThis a partily printed shelf with a design effekt mirroring a waves. It takes a total of about 1 and ½ spools of filamet i printed it in Esun pla Basic balck, most of the pieces need to be assembeld because i printed it on the A1 mini, if you were to use a bigger youd still need to cut some part but a lot less. i have used a wodden board for teh main body its got a messuremt of : - Lenght 100 cm -width 14 cm -thickness 14mm i have used diffrent size screws. i used m3.5 screws and as such had to drill open the holes a bit with a m4 bit. i used 30mm screws on the back and a combination of 30mm , 25mm and 20mm screws on the front. For assebly you need to know that to know the order they need to be placed in the back of the peices ther are strips that go from the bttem up. There is a 20mm gab between each piece, i have a guide for spacing added to the print profile or to my account so be sure to take a look if you cnat find it here. Boost Meif you liked the design be please tell