Slicer Discord
Waveshare 7.3" display frame (Pi Zero 2 & ESP32) – Modello 3D stampabile da MakerWorld MakerWorld
Electronics

Waveshare 7.3" display frame (Pi Zero 2 & ESP32)

22 Download
9 Likes
6 Makes
Vai al Modello
This is a display frame specifically designed for the Waveshare 7.3inch E Ink Spectra 6 (E6) Full Color E-Paper Display.Although the frame was designed around this display, it should be easy to adapt it to similar displays of various sizes. Feel free to adapt it for use with other displays, provided that you upload the print profiles to this project and include details of the changes made in the print profile description. There are two versions provided in the print profile:Raspberry Pi Zero 2 WH:The Raspberry Pi Zero 2 WH has a pre-soldered header, meaning the frame must be deeper to provide enough room for the e-Paper Driver HAT.Raspberry Pi Zero 2 W:As the Raspberry Pi Zero 2 W does not come with a pre-soldered header, you can solder the header pins in place yourself, allowing the e-Paper Driver HAT to sit flush on the Pi. This allows the frame to be shallower and thus less bulky.Raspberry Pi Zero 2 W w/o 8-Pin:Same as 2. but with the 8-Pin connector of the ePaper HAT removed for a
Categoria
Electronics
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Principiante Bassa affidabilità
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 0/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione