Thingiverse
Waveshare Pico-LCD-2 case
door Cyber-Katie
1
Downloads
1
Likes
0
Makes
This is a simple Case for the Waveshare Pico-LCD-2 display module, I couldn`t find an existing case for one anywhere so I made this, I will include the Freecad files in this as well so that it can be remixed and improved/modified by others.
you will need some sort of adhesive to keep the board in place as there are no mounting holes in the module, I used a few drops of UV setting resin to hold mine in place.
The only Tip I have is that when you`re printing the buttons, put four of them on build plate close together and use a brim so they overlap, I used an 8mm brim on each and had them all 5mm apart in Orca and they all printed fine,
Enjoy!
you will need some sort of adhesive to keep the board in place as there are no mounting holes in the module, I used a few drops of UV setting resin to hold mine in place.
The only Tip I have is that when you`re printing the buttons, put four of them on build plate close together and use a brim so they overlap, I used an 8mm brim on each and had them all 5mm apart in Orca and they all printed fine,
Enjoy!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
