Thingiverse
Waveshare Raspberry Pi Camera Mount for 2020 Extrusion
by dougbrion
28
Downloads
16
Likes
0
Makes
**Waveshare Raspberry Pi Camera Mount for 2020 Extrusion**
A camera mount with 2020 extrusion attachment via mast. The mount and camera case are completely *clip-fit* with no screws or fastenings required.
The camera front and back components allow the camera to either be in *portrait* or *landscape* modes.
Recommend printing the **cam_mast_XXXmm.stl** and **cam_front.stl** with the print settings below.
The **cam_back.stl** model however, should be printed with supports and also with a higher infill (possibly 100%) in order to ensure that the clip is as strong as possible.
The height of the **cam_mast_XXXmm.stl** is from the centre of the bolt hole at the base to the centre of the mount cone at the top.
**Future Work**
I will be adding different attachment types in addition to supporting the official Raspberry Pi Camera (both v1 and v2) by adding other camera case options.
A camera mount with 2020 extrusion attachment via mast. The mount and camera case are completely *clip-fit* with no screws or fastenings required.
The camera front and back components allow the camera to either be in *portrait* or *landscape* modes.
Recommend printing the **cam_mast_XXXmm.stl** and **cam_front.stl** with the print settings below.
The **cam_back.stl** model however, should be printed with supports and also with a higher infill (possibly 100%) in order to ensure that the clip is as strong as possible.
The height of the **cam_mast_XXXmm.stl** is from the centre of the bolt hole at the base to the centre of the mount cone at the top.
**Future Work**
I will be adding different attachment types in addition to supporting the official Raspberry Pi Camera (both v1 and v2) by adding other camera case options.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
