Wavy Bubbles Lamp -E27 & LED Lamp Kit

Wavy Bubbles Lamp A smooth, flowing lamp design with soft curves that look great both lit and unlit. Simple print with a clean modern look, especially nice with warm lighting. I included two base versions: Base for an LED Lamp Kit Base for a standard E27 light bulb ⚠️ Use LED bulbs only — regular incandescent bulbs can generate too much heat for 3D printed parts. Use Light deflector if you are printing the Shade in transparent filament, as without it the lightbulb will be seen clearly. Printing Settings: Shade: Print in Vase Mode / Spiral Vase 9 bottom shell layers 0.22 mm layer height Assembly: E27 LED Bulb: Insert the E27 Bulb Holder into the slots of Base, secure with glue (any glue will do). Mount the lightbulb base to the Holder using nut it came with and E27 fixture nut (or 2 printed fixture nuts). Lightbulb should sits tightly and does not move. See GIF below. LED Lamp Kit: Using screws attach the LED TO the Base. Thread the wire though the opening. <img src="https:/