Thingiverse
WDT spinner - Prototype 01
di 3DHawky
3
Download
1
Likes
0
Makes
Description:
WDT is the clear winner in distribution, but it takes longer to do it well.
This prototype aims to make it faster. Made with as few needles as possible. Enough space on top to not press on the grounds. Left open on top to not add stress on the needles/basket if the measurements are off a bit. Or you want to try it in ex. a 18gr basket.
Details:
For a 58mm, 21gr baskets.
Prep:
Depending on the calibrations of your printer you might need to burn out the holes a bit more. One side should have long needles. The other should be cut needles. That way 1 side will WDT the bottom, and the other the top as you spin.
Plz leave feedback, good or bad. I need to know what to change.
WDT is the clear winner in distribution, but it takes longer to do it well.
This prototype aims to make it faster. Made with as few needles as possible. Enough space on top to not press on the grounds. Left open on top to not add stress on the needles/basket if the measurements are off a bit. Or you want to try it in ex. a 18gr basket.
Details:
For a 58mm, 21gr baskets.
Prep:
Depending on the calibrations of your printer you might need to burn out the holes a bit more. One side should have long needles. The other should be cut needles. That way 1 side will WDT the bottom, and the other the top as you spin.
Plz leave feedback, good or bad. I need to know what to change.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!