Thingiverse
weather stripping
von tftangle
17
Downloads
11
Likes
0
Makes
Fix drafty doors and windows with this TPU weather stripping. Tested and proven in -30C temperatures in Alberta Canada, this simple print has helped keep my workplace warm.
I used generic TPU from Amazon (whatever was cheapest) and it came out fine. I printed at a high speed (75mm/s) and temp of 200C on an Ender 3. Perfect results.
Scale this STL file along the Y axis to extend to the maximum length of your print bed, or print multiple sections as long as you need. Scale the height or width to create a lower profile, to fit your application. It's a simple shape which you can squish accordingly.
I used gorilla glue to create an excellent bond in the middle of a drafty double-swinging door. I noticed a difference immediately, but YMMV.
I used generic TPU from Amazon (whatever was cheapest) and it came out fine. I printed at a high speed (75mm/s) and temp of 200C on an Ender 3. Perfect results.
Scale this STL file along the Y axis to extend to the maximum length of your print bed, or print multiple sections as long as you need. Scale the height or width to create a lower profile, to fit your application. It's a simple shape which you can squish accordingly.
I used gorilla glue to create an excellent bond in the middle of a drafty double-swinging door. I noticed a difference immediately, but YMMV.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!