Weather v2

First:
This is only the housing, you can find the whole project at:
https://nothnagel.org/wetterstation/

You can print this housing and need only some threatet rods M4, some Nuts and the electronics and one pipe with a diameter of 20mm. The complete housing for the electroncs is in the stl files.

Which things can this weather station do:
- Temperature
- Humidity
- Particular Matter
- Ozone
- Barometic pressure
- Ground temperature (via. DS18B20)
- Heat-Index (calculatet)
- Dew Point (calculatet)


I printed this with polylite PETG in white, and after solving the first problems, everything works fine (with the printing)