Webcam C120 Rebuild

Wanted to use the Logitech Webcam C120 for Octopi, but the clamp of the cam was so annoying I had to rebuild this.
Started with disassembling the cam (there are little screws under the rubber pads) and draw this swing arm.
The little pin inside "raspberry_cam_head.stl" was to small to print (although I think it can be done) it turned out to be much easier to glue "raspberry_cam_head A.stl" on the back of the original clamp and cut away al excess material.
Finnish it with sanding paper and your done. Saving an extra part and looks perfect ;)