Webcam Hinged Cover - Single Print

This is a hinged webcam cover for external webcams. It is not suitable for laptop webcams due to its thickness.

I use Bluetack/Prestik to hold it on my webcam but it could be attached with double sided tape etc.

If this is not perfect, I apologise as it is my first Fusion 360 design and first self designed 3d print.

Printing:

I sliced this in Cura 4.9.0 using the standard Ender 3 settings with Super Quality selected.

This is designed to print in a single print. After printing, it is important to very gently and slightly move the two parts side to side to allow the hinge to free itself as the tolerances are small.

Printing must occur in the direction in the STL or the hinge will fuse due to low tolerances.

I printed on brand new standard setup Ender 3 V2.