Thingiverse
Weed box
par TheBigGizmo
1.2k
Téléchargements
1.2k
Likes
5
Makes
Weed box
First print the weed logo, lower it 1mm so only the logo and outer line prints, then change filament, print the top of the box on top of the logo whit Z-hop on set to 0.6 .
The hinges uses M2X20 screws
Print whit no support.
0.2 Layer Height 0.4 nozzle
20% Infill
6 walls for more strength
Share a picture! Thank you!
First print the weed logo, lower it 1mm so only the logo and outer line prints, then change filament, print the top of the box on top of the logo whit Z-hop on set to 0.6 .
The hinges uses M2X20 screws
Print whit no support.
0.2 Layer Height 0.4 nozzle
20% Infill
6 walls for more strength
Share a picture! Thank you!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !