Weighted Hammer / Simple Hammer

Hey!

This is a hammer with a choice of parts so you can print 3 versions that I prepared ("All parts" files - description below) or combine your own. It's simple and it doesn't require any supports or additional rafts, brims etc. just level the bed.

I use it mostly to bump prints from the hotbed but you can scale it and use it however you like. You can print head-covers separately using TPU or other rubber-like material if you're worried about damaging the thing that you're about to hit.

Set bottom and top layers to 4, infill to 40% minimum (40-100%) but you don't have to worry about layer height - the one on the photo was printed in PLA with a 0.6 nozzle and 0.32 layer height (Cura "Draft quality") and it's enough for me. It works, it doesn't need to be pretty ;)

One that I printed is the version with one plug in 375% scale and I used some washers as weights. If you want to scale it to the size of your weights then use the Hammer-Plug.stl to set the scale as it is exactly