Welcome/Good Bye Keyhook

A sweet Keyhook that is welcoming you when you arrive at home. It also says Good Bye when you take your Key and leave. You can print it as Multicolor with the ACE or you can also print it without ACE. All writings on the parts are made with the Anycubic Slicer Next, so if you use the print profile you can easily change it. If you don´t use the print profile you need to change the infill settings on the weight to 100%. Otherwise the mechanism won´t work. The profile has 5 plates and is made for printing with and without ACE. Printing with ACE: Plates to Print: Housing kinematics Lid with Text for ACE Printing without ACE: Plates to print: Housing kinematics Lid Empty Text for Lid Empty You can color the text on the signs with permanent marker (f.e. Edding) or with acrylic paint. The Text for the Lid must be assembled with glue, soldering iron or double sided tape. To print without ACE you need to change the filament setting to only one filament. (click on the marked symbol on anycubic slicer next till there is only one filament left) Trouble shooting: If the mechanism isn´t working completely smooth you can cut the edge of the lever hole a little bit. Best is using a deburrer or a cutter. If you have any questions don´t hesitate asking. Have fun and leave a like if you like ;-)