Thingiverse
Wemos D1 mini bracket
von nonix
5
Downloads
3
Likes
0
Makes
It its a bit tricky to affix the Wemos as it has no mounting holes.
This is just a basic bracket for Wemos D1 mini, which could be used in two ways:
a.) Using STL files as a final product
b.) Embed and modify to a bigger 3D design using .skp files.
Printing:
The STL consists of two objects.
1.) split into separate objects
2.) Position longer outer edges on printing surface
3.) Slice with no support, but with a brim (skirt) to improve vertical stability while printing
Material tested: PETG
Glue two parts together.
This is just a basic bracket for Wemos D1 mini, which could be used in two ways:
a.) Using STL files as a final product
b.) Embed and modify to a bigger 3D design using .skp files.
Printing:
The STL consists of two objects.
1.) split into separate objects
2.) Position longer outer edges on printing surface
3.) Slice with no support, but with a brim (skirt) to improve vertical stability while printing
Material tested: PETG
Glue two parts together.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
