Wera Hex Case - Micro Screwdriver Storage

This is designed specifically to hold the 7pc Wera metric micro screwdriver hex set. I threw in a flat head micro screwdriver (size 0.5 - 3.0) to make it hold 8 total. Hex Sizes are: 3.0, 2.5, 2.0, 1.5, 1.3, 0.9, 0.7. You will need two M3x30mm machine screws to add clip, no need to tap the hole. The clip will be stiff at first but will break in over time. Printed the case itself in Bambu PLA Basic. Clip is printed in Bambu PETH HF. The hinges are print in place with the two shaft objects as well as the clip printed with 100% infill. If you don't want to print the labe on the front of the case or the size markers, just delete all the generic labeled bodies in the objects tab. The 3.0 and 2.5 Hex's have a different size shaft than the rest of them and thus wont fit in any other slot than what they are labeled. Here is the link to the Wera set this was intended for: https://www.amazon.com/dp/B007ICWAJC?ref=ppx_yo2ov_dt_b_fed_asin_titleBoost Me