WH1080 Wind Sensor Compactor

Shrinkify your WH1080 weatherstation wind sensors with that case. Make it more compact.
For better weather isolation, it is recommendet to add some hot glue on contact points.

1. Unscrew both sensors from the holder
2. Pull off the anemometer wheel for a simpler put-on of the case
3. Wrap the cable (which connects anemometer and wind vane) around the mount-shaft of the wind vane
4. Combine both sensors on its bottoms with a metal wire through the screw holes or glue them together
5. Put the sensor cable through the provided hole and pull over the printed case
6. Align straight the sensors and the case and glue them together
7. Put on the anemometer wheel again
8. Put in a pipe in the provided hole
9. Enjoy the more compact wind sensor