Slicer Discord
Whale HueForge  – Modelo 3D imprimible de MakerWorld MakerWorld
Hueforge & Lithophane

Whale HueForge

19 Descargas
34 Likes
0 Makes
Ver Modelo
WHALE HUEFORGE ARTMembershipDo you want to sell my designs or want to buy me a coffee ☕️? Please consider one of my subscription tiers. Thanks, Creatività in 3D***I was unable to load the print profile, as being a very detailed model, it takes a long time and is not accepted by the system. I then uploaded the file with all the settings as RAW (3mf) differently so that it can be downloaded and launched from Bambustudio*** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used:PLA Generic Black Transmission Distance: 0.3PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #13 (1.12mm) swap to BlueAt layer #15 (1.28mm) swap to BrownAt la
Categoría
Hueforge & Lithophane
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Confianza media
¿Por qué?
2 colores · impresión grande
Pieza única 2 colores / AMS
Soportes 1/3
Ensamblaje 0/3
Ajustes 2/3
Tamaño de cama 2/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Cama mín.
200 mm (Grande)
Colores
2 (AMS/MMU recomendado)
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección