Thingiverse
Whiskey Bottle Container
par gambafrolla
511
Téléchargements
308
Likes
5
Makes
This container is composed by two halves that join together using a screw/spiral structure. The box is designed to fit a whiskey bottle. Tested on Talisker, Caol Ila and Glen Keith but I think whiskey bottles comes in standard dimensions. Screwing/unscrewing is very easy an can be achieved even by gravity only.
Here you can find a video: https://youtu.be/FeGQvewy7ps
The print must be done in vase mode (spiralized outer contour).
My final model is realized using:
- Spiralized outer contour mode
- Creality Ender 3
- 0.2 mm layers
- 1mm bottom thickness (increase it to add robustness)
- Printing time: around 6h45m for each part
- SUNLU PETG+
- (for SUNLU PLA+ with same specs it would take 6h10m for each part)
Both halves files must be printed in spiralized outer contour with the screw part positioned on the upper part
Hints:
-the inner halve must be used as the TOP halve to avoid mishaps during the transportation of the enclosed bottle.
-print parameters must be pe
Here you can find a video: https://youtu.be/FeGQvewy7ps
The print must be done in vase mode (spiralized outer contour).
My final model is realized using:
- Spiralized outer contour mode
- Creality Ender 3
- 0.2 mm layers
- 1mm bottom thickness (increase it to add robustness)
- Printing time: around 6h45m for each part
- SUNLU PETG+
- (for SUNLU PLA+ with same specs it would take 6h10m for each part)
Both halves files must be printed in spiralized outer contour with the screw part positioned on the upper part
Hints:
-the inner halve must be used as the TOP halve to avoid mishaps during the transportation of the enclosed bottle.
-print parameters must be pe
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
