Whiskey Bourbon 2 oz Sample Holder

STL file Whiskey Bottle Holder 🍾 ・3D printer design to download・Cults (cults3d.com) This is a model I designed for a friend for going to whiskey tastings where samples can be saved in small bottles. The holder has space for six 2oz bottles, a small funnel, and a grease pencil for labeling the bottles Amazon Affiliate LinkThis design utilizessix M3 x 5mm x4mm heatset inserts Amazon Affiliate Linksix M3 x 8mm bolts (socket or button head both work). Amazon Affiliate LinkI have included but not printed/tested a version which does not use heatset inserts but instead threads into the plastic. This would require six M3 x 8-12mm bolts (depending on how far into the part you want the fastener to go. Printer tolerances will be important here as too loose and the bolt won't hold, too tight and it will split the part along the layer lines. I would strongly suggest printing a smaller test piece with just the holes to test your tolerances before committing to the entire part if using this.If u