Thingiverse
Animals
Model downloaden
White Rabbit with Quarz Clockwork
54
Downloads
41
Likes
2
Makes
When I first saw this stunning model from Reddadsteve, I directly knew this would be the perfect Clock for my apartment.
I printed all the parts of the rabbit at 150% and had no problems, with 2 exceptions:
I printed the Body_Pin at 160% except for the lenght,
and I printed the Glasses_Lenses at 145% (Clear PETG)
I redesigned the whole watch, it now can fit a Quartz clockwork (55.8x55.8x15.4mm), I took the clockwork out of a 3€ clock.
As you see there are 2 versions, V1 has a round top and worked for me but you will need supports, so i designed the V2 with a sqaure cover, i think this version is better, but i didnt test it!
I reused some of the Parts of the original watch (at 150%), those were:
-watch_rim1
-watch_rim2
-watch_face (I drilled out the hole to 6.5mm)
-numbers
One problem was that you could see the clockwork trough the thin watch_face (I used glow in the dark PLA), so i put a sheet of paper behind it.
I printed all the parts of the rabbit at 150% and had no problems, with 2 exceptions:
I printed the Body_Pin at 160% except for the lenght,
and I printed the Glasses_Lenses at 145% (Clear PETG)
I redesigned the whole watch, it now can fit a Quartz clockwork (55.8x55.8x15.4mm), I took the clockwork out of a 3€ clock.
As you see there are 2 versions, V1 has a round top and worked for me but you will need supports, so i designed the V2 with a sqaure cover, i think this version is better, but i didnt test it!
I reused some of the Parts of the original watch (at 150%), those were:
-watch_rim1
-watch_rim2
-watch_face (I drilled out the hole to 6.5mm)
-numbers
One problem was that you could see the clockwork trough the thin watch_face (I used glow in the dark PLA), so i put a sheet of paper behind it.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!