Who-Ask Machine

My version of the mini Simpsons TV, based off of the Who-Ask machine from Futurama.

Credit to Brandon Withrow for the original
https://withrow.io/simpsons-tv-build-guide

Same components used, only difference is a I used a mini toggle switch with a 6mm hole size instead of the push button.

Assembly is with hot glue for everything except connecting the base to the body. I used superglue there for a stronger connection. Similarly the antenna is superglued on top.

For the antenna - Print the antenna file, then using a lighter or a heatgun, slightly heat up a length of filament and stretch it out. You want a mild taper so don't stretch too much. Then, using the heat again, gently heat up the stretched filament and bend it to match the antenna from the show. Then clip off your bent portion and superglue to the printed part. The top of the antenna printed piece is 1.75mm in diameter, so when you cut the stretched filament you leave a small section where it is still the original