Whoopsie 65mm quad

Since I've been flying whoops, I've been breaking frames of my Mobula6. Now that my favorite supplier is out of the EU, I need to find another way to keep flying. Although it's slightly heavier than the original frame (Original frame is 3,3 grams, this is 7 grams) it's also easy to print so if you're downed anyway you can just print a new part and go fly again.

Ultralight version only needs the square frame printed. This frame is 1.5 grams so shaves 2 grams off of the total weight, at the cost of no more prop ducts.

The full version needs:

- 1 x Square Frame
- 1 x Prop Protectors
- 2 x Battery Clip
- 4 x Spacers

The battery clip has to be glued underneath the frame. You don't absolutely need them but they come in handy as the battery tends to move.

Assembly instructions:

Glue the battery clips under the square frame. Put a spacer on all four flightcontroller-stands, and then rest the prop ducts on the flightcontroller-stands. Now, install the motors, FC, camera and