Wicked Hueforge

Hueforge inspired by Wicked Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x240mm in size You can change the X and Y axis, DO NOT CHANGE THE Z AXIS You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 #003b3b PLA BambuLab Basic Green Transmission Distance: 2 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #e2dedb PLA PolyLite White Transmission Distance: 5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Mistletoe Green At layer #13 (1.12mm) swap to Green At layer #17 (1.44mm) swap to Yellow At layer #23 (1.92mm) swap to White This slider is set higher than the mesh depth. It is not affecting your final me