Thingiverse
Electronics
Zum Modell
WiFi Kit 32 Case
123
Downloads
65
Likes
2
Makes
Small case for the WIFi Kit 32.
The Wifi Kit 32 module is made by Heltec and is an ESP32 development board with a built-in OLED display. I purchased it on Amazon but I'm sure you can find it online from other retailers.
I posted 4 parts; 2 tops, and 2 bottoms.
The Large Top Cover is to be used with boards that have pins attached. The Small Top Cover should be used if no pins are attached. Program and Reset buttons can be accessed by built-in buttons.
The Large Bottom Cover can accommodate a small battery or other things as shown in the picture. The Small Bottom Cover is for minimum size.
Both Bottoms Covers can be used with either Tops Covers; pins or no pins.
The Wifi Kit 32 module is made by Heltec and is an ESP32 development board with a built-in OLED display. I purchased it on Amazon but I'm sure you can find it online from other retailers.
I posted 4 parts; 2 tops, and 2 bottoms.
The Large Top Cover is to be used with boards that have pins attached. The Small Top Cover should be used if no pins are attached. Program and Reset buttons can be accessed by built-in buttons.
The Large Bottom Cover can accommodate a small battery or other things as shown in the picture. The Small Bottom Cover is for minimum size.
Both Bottoms Covers can be used with either Tops Covers; pins or no pins.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
