Thingiverse
Wifi Trax- WFD 30 Case
di tucstrlly
0
Download
0
Likes
0
Makes
This is a case for a wi-fi device from Wifi Trax. WFD-30.
The unit plugs into the NCE cab bus and gives you Wi-Fi throttles (phone or TCS UWT).
Case is assembled with 2-56 screws x4
Use 2-56 screws in the 4 corners to hold the box together.
Drill out the clearance holes in the print with a #41 drill
Lightly drill with a #50 drill the bottom holes and tap with a 2-56 tap or just be gentle with the screws in the plastic.
The unit plugs into the NCE cab bus and gives you Wi-Fi throttles (phone or TCS UWT).
Case is assembled with 2-56 screws x4
Use 2-56 screws in the 4 corners to hold the box together.
Drill out the clearance holes in the print with a #41 drill
Lightly drill with a #50 drill the bottom holes and tap with a 2-56 tap or just be gentle with the screws in the plastic.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!