Winchester Safe Keypad Mount

SummaryThe control panel was pried off the front of my Winchester safe in a break-in. Since the panel was originally screwed onto the front before the stick-on button pad was attached, there was no way to directly replace the screws. Instead, this adapter will attach to the front using a pair of countersunk M4 screws, and the panel clips onto the adapter plate.Print SettingsPrinter Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.20 mm Infill: 20%Filament: Gizmodorks PolycarbonateBlack Notes: I used polycarbonate to ensure good strength on the tiny mounting clip tabs. Less durable filaments may work okay, but I didn't bother testing them.