Windmill Spinner (Kit) Petal Flag

This is Part of a Construction Set for making Garden Windmill Spinner. This is Blade or Petal Shape with a Blank Rectangle on the tip - in my case for painting as a Ukrainian Flag. I will use the 8 way hub. The Construction Set will require printing of the plastic parts to make a model and will also require separate supply of the 608RS ball bearings, M8 Bolts, M8 Nylock Nuts, M8 Washers, Self tapper screws and glue. The finished Model will also require a Stainless Steel 1 metre length 6mm diameter rod per model built. This is the stanchion and post for the model. The Model will consist of: Plastic Parts1 - Body - Various different bodies are currently being designed2 - Hub - Various different hubs are being designed with internal spacer3 - Petals, wings, propellers that fit into the hubs are being designed4 - Center Dome or Cover for the various Hubs are being designed5- Spikes – For setting into the ground.Additional Parts1 – Axle per Hub – M8 Bolt, Washer, 2 Ball Bearings, Washer and