Thingiverse

Windrad D145 / Helix Vertical Windmill

by bastelgarage

96 Downloads

78 Likes

0 Makes

You can find assembly instructions here:
===
[www.bastelgarage.ch](https://www.bastelgarage.ch/index.php?route=extension/d_blog_module/post&post_id=24)

The following material is required:
===
- 1x M6 threaded rod 1m
- 4x nut M6
- 2x [ball bearing 606ZZ 6x17x6mm](https://www.bastelgarage.ch/rillenkugellager-606zz-6x17x6mm)
- [Isopropyl alcohol to wash out ball bearings](https://www.bastelgarage.ch/1-liter-isopropylalkohol-isopropanol-99-8)
- WD40 to relubricate the ball bearings
- [PLA+ Filament](https://www.bastelgarage.ch/3d-drucker/filament-1-75mm/pla)
- Optional Loctite threadlocker

Print Setting:
==
- Layer height 0.2mm
- Spiral vase mode => Active
- Solid bottom layers 5
- Solid top layers 0
- Extrusion width 0.45mm

Visit also our onlineshop:
===
- [www.bastelgarage.ch](https://www.bastelgarage.ch/)

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

200 mm (Large)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Windrad D145 / Helix Vertical Windmill?

Any FDM printer should handle Windrad D145 / Helix Vertical Windmill just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Windrad D145 / Helix Vertical Windmill need supports when printing?

No supports needed for Windrad D145 / Helix Vertical Windmill — it's designed to print clean off the bed.

What file format is Windrad D145 / Helix Vertical Windmill available in?

Windrad D145 / Helix Vertical Windmill is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Windrad D145 / Helix Vertical Windmill free to download?

Yes, Windrad D145 / Helix Vertical Windmill is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Windrad D145 / Helix Vertical Windmill

Similar Models

Add to Collection