wing nut socket to 1/4 adapter

After spending half an hour trying to remove a stuck wing nut from a very innacessible place, I decided to make a tool for it.
This adapts to anything with a 1/4 inch square socket, and has flat sides for better torque application if needed
Original use was to remove wing nuts used for WC attachments.
.
I printed it with 4 vertical perimeters and a 40% infill
the socket is 60mm long, and is designed for 1/2inch core 1 inch external diameter wing nuts
(my mat grid on the picture is 10mm)

dropbox link with the stl, 3mf and fusion360 archive
https://www.dropbox.com/scl/fo/d0w2ihejs2r1jrgruja37/h?rlkey=3fgw44990tgj8muc5r6yxhb6l&dl=0