Winter Trooper - Hueforge

Project: Winter Trooper - HueforgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 203.44x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Silver Transmission Distance: 0.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Blue GrayAt layer #13 (1.12mm) swap to SilverAt layer #16 (1.36mm) swap to Jade White for the rest. Boost MeYou like this model? Boost me to the infinity and beyond! 🚀