WIP Parametric shelf corner hanging solution

A parametric cornered shelf hanging solution, so that you can hang a coat, a bag or else on the side of your shelves. I could not recommend enough to print it with a strong infill pattern like gyroid, so that it can support anything you will hang to it. Also, printing it with PETG or ABS or even more resistant materials is best.I'm giving you the step file in order for you to modify it depending on where you want to put it. There are three types of parts : The corner part, the intersection and the cross. Measure the thickness of the walls and flats of your shelf, and put them in the "verticthick" and “horizthick” fields, in the parameters tab. You can also modify the "depth" field, this will influence the weight of what you can hang and the amount of filament required. You can modify the tolerance applied to the part, I have a 0.5mm tolerance applied by default, but it can be increased or decreased. Then, you can change the distance the part goes on the wall from th