Witch - Hueforge

--My lighting cannot do it any justice-- I like making my HueForge's a bit thicker than normal. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.5mmThe Max Depth is 3.3mm and the Actual Depth is 3.1mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.4PLA BambuLab Basic Dark Grey Transmission Distance: 4.5PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic Orange Transmission Distance: 5.3PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #21 (1.76mm) swap to Dark GreyAt layer #23 (1.92mm) swap to BrownAt layer #25 (2.08mm) swap to OrangeAt layer #27 (2.24mm) swap to YellowAt layer #30 (2.48mm) swap to Jade White for the rest. **NOTICE**To print more than 4 colors through AMS:1. Load AMS with the first 4 colors