Witcher facing a angry draggon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mmFilaments Used: (* = Owned) #000000 PLA Smart Recycled Black Transmission Distance: 0.5 #aa00ff PLA Smart Recycled Violet Transmission Distance: 1.2 #ff0000 PLA Smart Recycled Red Transmission Distance: 4.4 #f97f1e PLA Smart Recycled Orange Transmission Distance: 5.7 #e6cc22 PLA Smart Recycled Yellow Transmission Distance: 9.3 #ffffff PLA Smart Recycled White Transmission Distance: 5.7This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Violet At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest.