MakerWorld
Hueforge & Lithophane
Go to Model
Witcher - HueForge print
10
Downloads
10
Likes
3
Makes
A witcher doing what a witcher does best - taking out the trash. Measures 150mm x 150mm. The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below. If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Green Transmission Distance: 1.6PLA BambuLab Basic Blue Grey Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 3PLA+ Esun Fire Engine Red Transmission Distance: 4PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 3Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to GreenAt layer #8 (0.72mm) swap to Blue GreyAt layer #11 (0.96mm) swap to Jade WhiteAt layer #15
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!