Thingiverse
Witcher Steel Sword
par DominuM
102
Téléchargements
66
Likes
0
Makes
Witcher Steel Sword
Printed on Anycubic Mega X
0.2 Resolution
22% infill
Support on the plate only.
The total length of 118cm.
Blade printer separately from order parts.
Unfortunately, the end of the blade was too bendy and I have to use epoxy glue to make it stiffer.
True the two parts of a blade and lover shaft are small hols.
I used them to route a 0.8mm metal cable to strengthen the whole structure.
After the glue solidifies on the blade, all elements are filled with filler and smooth. Then I applied a plastic primer and finished with chrome silver spray.
Handles wrapped in 2.5mm black latchet.
In the file list, there is a project with my arrangement of elements on the printer's plate.
Printed on Anycubic Mega X
0.2 Resolution
22% infill
Support on the plate only.
The total length of 118cm.
Blade printer separately from order parts.
Unfortunately, the end of the blade was too bendy and I have to use epoxy glue to make it stiffer.
True the two parts of a blade and lover shaft are small hols.
I used them to route a 0.8mm metal cable to strengthen the whole structure.
After the glue solidifies on the blade, all elements are filled with filler and smooth. Then I applied a plastic primer and finished with chrome silver spray.
Handles wrapped in 2.5mm black latchet.
In the file list, there is a project with my arrangement of elements on the printer's plate.
DominuM publie également sur
4 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !