WLED Lamp

I need a better photo, its more impressive in real life, taking a photo of LEDs is hard :-/ Demo, assembly and printing videos are at https://imgur.com/a/A1xNhKT Required parts You need 2 of… WS2812B ECO 8 x 32 Flexible matrix panel - MAKE SURE to select the right version, link defaults to 8x8 https://s.click.aliexpress.com/e/_DdZWeA7 You need 1 of… Athom WLED ESP32 controller - you don't need the IR Remote, just use your phone https://s.click.aliexpress.com/e/_Dll3xSX Note there is a slot in the base for adding a zip tie to retain the incoming power cable. Space is tight, but normal wire ferrules can be used into the Athom controller terminals and still clear the led panels on assembly. Tap a M4 x 0.7 thread into the two mount holes in the base. Use a Socket Head Cap Screw M4x07 6mm to hold the controller onto the base. Use at least 16 AWG for main 5V power in and out, then tie the 5v/GND out to the 5v/GND in parallel to all the 20 AWG wires built into the 2 panels. You can be rel