Woctogate

Woctogate is a WLED octoprint printing status deported, stargate inspired.

Base_cover_board4x6cm.stl is for 4x6 cm prototype pcb, need screws M2.5 and spacer.
Base_cover_blank.stl to make your own
Base_cover need 4x countersunk M3x4(even 6 or 8mm)

Ring_light_diffuser.stl should be printed with a white color material

To mount the ring, you can use the Ring_mount_helper.stl to keep the internal ring at the correct hight.
I didn't use glue, but if it's too loose you can place some superglue points to keep it in place.

The print use a clearance of 0.2mm, even 0.15 for the ring parts, please tell me if you have some issue.

And need 1x LED Ring 24 x WS2812 Inside Diameter :7.2cm Outside Diameter: 8.5 cm

demo:
https://youtu.be/6G00PqFf4L8

assembly:
https://youtu.be/7QdBCLxfk30


edit 26.08.2021:
f3d source file now included