MakerWorld
2D Art
Voir le modèle
Wolf - Bookmark
31
Téléchargements
22
Likes
17
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 55.03x163.58mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2mm and the Actual Thickness is 1.92mm Filaments Used:PLA Aurapol Black Transmission Distance: 0.4PLA Aurapol Grandma Gray Transmission Distance: 3.7PLA Aurapol White Transmission Distance: 2.7This print uses 3 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Grandma Gray At layer #21 (1.76mm) swap to White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
