Wolf Boomark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 67.47x152.4mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #0e0e10 PLA+ Numakers Pitch Black Transmission Distance: 1.6 #52595d PLA+ Numakers Dark Gray Transmission Distance: 0.3 #8c969d PLA+ Numakers Light Gray Transmission Distance: 3.2 #f1ece1 PLA+ Numakers Pure White Transmission Distance: 4.8 This print uses 4 unique filamentsSwap Instructions: Start with Pitch Black At layer #9 (0.8mm) swap to Dark Gray At layer #11 (0.96mm) swap to Light Gray At layer #15 (1.28mm) swap to Pure White for the rest.