Wolf hueforge

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PETG JAYO Black Transmission Distance: 0.3PLA PolyLite Starlight Neptune Transmission Distance: 1PLA PolyLite Pro Polymaker Teal Transmission Distance: 0.5PLA PolyTerra Pastel Ice Transmission Distance: 1.6 Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Starlight NeptuneAt layer #10 (0.88mm) swap t