wolf hueforge

Project: lobo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 225.83x395.2mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #e11021 PLA Copymaster 3D Red Transmission Distance: 4This print uses 5 unique filamentsSwap Instructions: Start with PolyLite Black At layer #6 (0.64mm) swap to BambuLab Basic Blue Gray At layer #9 (0.88mm) swap to BambuLab Basic Jade White At layer #11 (1.04mm) swap to BambuLab Basic Black At layer #15 (1.36mm) swap to Copymaster 3D Red At layer #20 (1.76mm) swap to BambuLab Basic Jade White for the rest. Boost Me