Wolverine Hueforge

Just a Wolverine hueforge I threw together and hope you all can enjoy it too! Print at 100% infill with a layer height of 0.08mm with a base layer height of 0.16mm The model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.5mm and the Actual Depth is 3.6mm Filaments Used:PLA Basic Black Transmission Distance: 0.3PLA Polyterra Sapphire Blue Transmission Distance: 3.5PLA Polyterra Savannah Yellow Transmission Distance: 6.5PLA Polyterra Cotton White Transmission Distance: 5 Swap Instructions:Start with BlackAt layer #12 (1.04mm) swap to Sapphire BlueAt layer #20 (1.68mm) swap to Savannah YellowAt layer #30 (2.48mm) swap to Cotton White for the rest. (It takes a long time to slice and is a relatively long print too)