Wolverine - Hueforge

Je vous présente mon nouveau tableau Hueforge : ServalIl s'imprime en 4 couleurs.Le modèle original est trop grand pour la A1 mini. The Model is 140.21x250mm in sizePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Blue Gray At layer #23 (1.92mm) swap to Sunrise Orange At layer #25 (2.08mm) swap to Jade White for the rest.