Wolverine

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 134.6x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3Boost Me PLA+ Esun Dark Blue Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #13 (1.12mm) swap to Yellow At layer #22 (1.84mm) swap to White for the rest.