Woow!

Dimensions:- width of the entire inscription: 46 cm,- height: 14 cm,- depth: 7 cm, I used black and white PLA to print. I glued the black elements with Akfix 705 glue. In the middle of the letters I installed the remains of LED strips from other projects - there are holes for power cables between the letters. In the photos you can see individual points of light - in reality they are not visible - the light is relatively soft. I didn't want to install any controller for the RGB strips, so I soldered the power supply directly to each strip. In my case, the tapes are simply inserted inside and not glued with anything. Probably gluing them to the interior walls would give a better lighting effect.The white parts fit inside quite tightly. They can be easily removed, but if the inscription is placed on a shelf, they do not fall out on their own, so there is no need to stick anything on them.