Slicer Discord
Word Clock based on LED Matrix – 3D-Druckmodell von Thingiverse Thingiverse

Word Clock based on LED Matrix

von nias123
357 Downloads
302 Likes
0 Makes
Zum Modell
This is a 256 Digit Word Clock using a Wemos D1 Mini Module & a 16x16 WS2812B RGB LED Flexible Digital Light Panel.

The clock is initially setup from a web interface including NTP server address for time setting.

Once set from an NTP server the clock will run off it's internal RTC.

The RTC is synchronised hourly if you have a local NTP server or daily if an internet NTP server is used.


The display with linear seconds was based on my original word clock. http://www.brettoliver.org.uk/Word_Clock/Word_Clock.htm

All files and more can be found on the main web page for this clock http://brettoliver.org.uk/Word_Clock_LED_Matrix/Word_Clock_LED_Matrix.htm

I got my 16x16 LED Matrix from here https://www.aliexpress.com/item/1005002399031444.html?spm=a2g0o.order_list.order_list_main.5.35961802DB6WcT
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen