Word Domination Insert

This is a large,stable print for the game "Word Domination" by Jeff Beck and Uproarious Games.

This is meant to go inside the box, on top of the letter tiles. The tiles should be stored vertically in three columns of 35 tiles each along the long side of the box. The instruction manual and the player cards are placed, long-edge first, into the space left in front of the 3 columns of tiles. This leaves a roughly 135mm x 70mm x 34mm (LWH) space for this insert. The "lid" to this insert is the lid of the box. The zeppelin holders have a right and left configuration. You need to print 2 of each type. The zeppelin holders can be removed by using the oval holes underneath and used during play. The round marker holder is placed in the insert after all 4 zeppelin holders are stored away.

I am using an Ender 3 v2 with a 0.4mm nozzle. At a 0.3mm layer height and 20% infill, the entire set uses about 110g of filament. I would suggest using a wall line count of 4, to maximize sturdiness. I r